kic2000炉温仪说明书
通常是仪器过热自动保护后怎样进行复位?
退出KIC2000软件
1，找到KIC Profiler 2000\Log\kic2000usersettings.kiccfg ，用记事本方式打开
2，把文件中的ViewHostDialog=0改为=1，然后保存并退出。
再次启动KIC2000软件你就可以看到KICHost界蚂前茄面了。
Can try these steps, remark to using English Language
Recommend is use 9V ALKALINE Battery
1. Make sure the SlinKIC2000 software is close.
2. Under the root directory on your hard drive, under the folder the KIC Profiler 2000 you will find a folder called "Log".(Using Windows Explorer, open the X:\KIC Profiler 2000\Log\kic2000usersettings.kiccfg file)
3. Under the Log folder there is a file called "KIC2000UserSettings.KICCFG"
4. Open this file using Note or WordPad text editor.
5. With file opened under the text editor, find the line: ( " ViewHostDialog=0", Set this line to =1, Save changes to the file. )
6. Restart the SlimKIC2000 software and you motice that a second application will open, the KIC Host. ( On the Windows Taskbar, click on the "KIC Host" tab)
7. Direct connection to SlimKIC2000, restart SlimKIC2000 Unit.
8. Select "Configure SlimKIC" .
9. Another Window will open. Select "悔让Write SlimKIC Setuop" . You should see dialog appear in that window which says " Write SlimKIC Successful".
由深圳市时汉电子为你专业服务，闷察如有不明白的地方。CALL： 138 0270 8085 唐/R
wickon炉温测试仪使用教程
曲线往下跑是测温线正负极接反了
报“必须超过启动点130以上渣察并。”你的温度太没数低。仪器认为你没有完成一次炉温测试，所以不能下载。如有需要可以电话186 203 77855，换几条新如迹的测温线就行了